Shenzhen Topmay Electronic Co., Ltd.
We deal globally based on Sincerity, Reliability, Deligence and Innovation.
Add to Cart
Metallized Polyester Film Capacitor CL21 1.5UF 250V For Lighting
CL21 metallized polyester film capacitor: the capacitor is made of polyester film as the medium and is wound by depositing aluminum on the film as the electrode by means of vacuum evaporation. It is wrapped by epoxy resin, with stable electrical performance, good self-healing, long service life, wide capacity range, small size and light weight. Used for dc and VHF signal isolation, bypass, coupling. Widely used in filtering, noise reduction and low pulsation circuits.
Features
● Wide capacitance range, small size
● Long Life due to self-healing effect
● Suitable for block, by-pass and coupling of DC and signal to VHF Range
● Widely used in fliter, noise suppression and low pulse circuits
Configuration
Non-inductive, wound with metallized polyester film as the dielectric and electrode with copper-clad steel leads and epoxy resin coating.
copper-clad steel leads and epoxy coating
Specifications & Outline Drawing
| Referance Standard | GB7335-87 |
| ||||||||||||||
| Climatic Category | 40/85/21 | |||||||||||||||
| Rated Voltage | 250VDC | |||||||||||||||
| Capacitance Range | 3.3uF | |||||||||||||||
| Capacitance Tolerance | ±10%(K) | |||||||||||||||
| Voltage proof | 1.6UR(5s) | |||||||||||||||
| Dissipation Factor | ≤1%(20℃, 1KHz) | |||||||||||||||
| Insulation Resistance (20℃,1min) | ≥7500MΩ (CR≤ 0.33 uF) ≥2500S (CR＞0.33 uF) | |||||||||||||||
Dimensions
| W(mm)±1.0 | T(mm)±1.0 | H(mm) | P(mm) | ||||
| 22 | 6.6 | 13 | 20 |
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
Our series of strong products of capacitors can be divided into below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65, CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in , Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor