Shenzhen Topmay Electronic Co., Ltd.
We deal globally based on Sincerity, Reliability, Deligence and Innovation.
Add to Cart
CBB60 1+2uf 250VAC Twin Tub Washing Machine Motor Run Capacitor
Features of CBB60 capacitor
◆Non induction winding structure of metallic polypropylene membrane.
◆Small in bulk, long life-span and good self-healing characteristic.
◆High insulating resistance, little temperature changing inside, excellent stability of capacitance.
◆Non-toxic and non-leaking, environmental friendly.
◆Suitable for starting and operating 50HZ(60HZ)AC single-phase electromotor.
◆Widely used as the start-up and running capacitor that is special for micro water pump, cleaning machine, washing machine and single-phase household electrical appliance.
◆Use round plastic shell and insulation sealed lid for sealing, plastic lid for sealing or resin for sealing.
◆Flat bottom or fixing stud M8*12.
◆Fasten terminals, Lug, wire, cable.
◆Plastic can, ABS, PC.
Specifications
| Capactiance Range | 1+2uF |
| Capacitance Tolerance | ±5% |
| Rated Alternate Voltage | 250VAC |
| Rated Frequency | 50/60HZ |
| Operating Temp | -25~+70 |
| Insulation Resistance | T-T ≥3000MΩ.uf(20℃.100VDC) T-T ≥2000MΩ.uf(20℃.100VDC) |
| Dissipation Factor | Tanε≤0.002(100HZ,20℃) |
| Endurance Voltage | Between the eletrodes: 2.0Un2S Between the eletrode and the shell: 2000vac 2S |
Mechanical Property
| No. | Items | Standard Reference |
| 1 | Lead-end Strength: The capacitor has been subjected to the following test, and the exterior should not be damaged. .Tensile Force: 20N, 0.5 square mm at least for external lead | The exterior should not be damaged. |
| 2 | Vibration: vibration frequency 10-55Hz, amplitude 0.35mm X.Y.Z, Each axis has 10 frequency cycles per minute, 1 times per minute | No change for capacitance value |
| 3 | Damp heat test :Severity 21days | The change of capacitance value is less than 0.5% |
Product Photos
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
Our series of strong products of capacitors can be divided into below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65, CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in , Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
More details, kindly contact us freely!