
Add to Cart
Ultracapacitor 400F 2.7V Super Capacitor For Power Energy Storage
2. Application:
3. Standard Test Conditions
DL/T 1652-2016 Technical Specification for Super capacitors for Power Metering Devices
3. General Specifications
Rate discharge Cap. F(25℃) ( ΔV=2.16V-1.35V) | Cap. Tolerance (25℃) | Rated Voltage (V) | Operating Temp. (Top) | ESR (1KHz) (mΩ) |
400 | 0%~+30% | 2.7 | -40~70℃ | 10 |
4.Product Structure
This capacitor is on the basis of theory of double layer capacitor. Internal using activated carbon as positive and negative electrodes, separated by electrolyte and diaphragm between two electrodes, To seal using aluminum shell and rubber plug. The lead terminals are on the same side of the capacitor.
5.Performance Index
ITEM | Specification | |
1 | Temperature Characteristics | Temperature +70℃,|△C/C| ≤30%,ESR≤specified value(25 ℃); Temperature -40 ℃,|△C/C|≤30%,ESR≤ 4 times initial value(25 ℃) |
2 | High temperature load | Temperature +70 ℃ added rated voltage, after 1000h,|△C/C|≤30%,ESR≤ 4 times specified value. |
3 | High temperature without load | Temperature +70 ℃added rated voltage, after 1000±4h,|△C/C|≤30%,ESR≤ 2 times specified value. |
4 | The steady state damp heat test | Temperature +40 ℃, 90-95% RH, 240hrs later, |△C/C|≤30%, ESR≤ 4 times specified value. |
5 | Cycle life Expectancy | added rated voltage, under room temperature, cycling charge and discharge testing for 500000 times, |△C/C|≤30%,ESR≤ 4 times initial value(25 ℃) |
6. Mark
7. Outline Drawing and Dimensions
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.